Electrosoft Class 1

  • Manufactured by: Sperian

 Ask a Question 

Overview

For electrical work with a maximal voltage of 7500 volts. Must be used with a leather overglove.

Reference Number: 2091911
Line: Latex

Industry
  • Energy or Electricity
  • Maintenance
  • Telecoms
Product Use: For electrical work with a maximal voltage of 7500 volts. Must be used with a leather overglove.

Features
  • Beige natural latex insulating glove
  • Cut edge
  • Category RC

Benefits

COMFORT
Its ergonomic design combined with a lightly powdered interior increases the comfort by providing additional softness and allows the glove to be put on and taken off very easily.

RESISTANCE
The natural latex base offers high dielectric characteristics.
Its thickness (1.5mm) provides good dexterity while offering protection up to 7,500 volts.

SAFETY
His length protects a large part of the forearm.
It must be used with a leather overglove.

Technical Descrription

CE CATEGORY : III Irreversible risks
In accordance with standards :
- EN 60903-2003
- CEI 903-2002

CHARACTERISTICS :
- Beige natural latex insulating glove
- Cut edge
- Category RC

Product Technology: Dipped Gloves
Glove/liner color: Beige
Coating Type: Latex
Length: 41 cm
Thickness: 1.5 mm
Harmlessness: In conformity with the European standards
Dexterity: Class 1
Sizes: 8 to 11

Certifications
  • EC Category PPE: 3
  • Quality Assurance: ISO 9001 / 2000
  • EC Attestation: EC Attestation
  • EC Attestation Number: 0077/016/078/02/98/0001 - EXT 04/09/06

Maintenance

Storage Information
Gloves that are used frequently should be tested at intervals less than 6 month.
Gloves that are used only occasionally should be tested after each use and, in any case, at intervals of not more than 12 months.
Gloves held in stock should be retested at intervals not exceeding 12 months.
Store in original packaging (Opaque and anti-UV packaging used for protection and instructions for use). Do not compact or fold.
Do not expose to heat sources (sunlight, radiators, artificial light). Store between 10°C and 21°C.

Inspection : Before each use, carry out a visual inspection and check the glove inflation. Any puncture or perforation makes the gloves unusable.

Precautions : Do not expose to solvents or chemicals that may cause deterioration. Do not use the glove when damp.

Cleaning: use water and soap. Dry below 65°C with ambient humidity.

Care Instructions
This article can be washed with soap and water at a temperature not exceeding 65°C.
The gloves must be dried througly at a temperature not exceeding 65°C.


 Product Brochure
Copyright © 2022 Atlas Safety Products